Loading... Please wait...

2011-2014 T-GDi Charge Pipe

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
Nameless Performance
13 product reviews
RRP: $419.00
$319.00 (You save $100.00)
Shipping:
Calculated at checkout
Current Stock:
13

 Product Description

These are the LAST of the 2011+ T-GDi Charge Pipes. Get yours before they're gone forever!

The Nameless Performance 2011-2014 Kia Optima Charge Pipe & Synapse Engineering Synchronic BOV Assembly provides the best solution for a factory replacement Blow-off Valve while improving throttle response and smoothing the power curve through a perfect seal under boost.  The four main benefits of this system are simply:

  • Synchronic BOV acts as a secondary intake source downstream of the turbocharger to improve throttle response when the car is below its boost threshold. 
  • Fastest acting BOV on the market with a 56 millisecond time from sealed to fully open. 
  • Perfect seal of boost up to 150psi test pressures. 
  • Patented Self Centering Tiered Piston Actuator instantly opens and closes without use of a diaphragm or heavy spring. 

Features:

  • Mandrel Bent T304 Stainless Steel Charge Pipe Assembly, 2.25" factory diameter for zero pressure drop over the factory design. 
  • CNC Laser Cut integrated bracket & weld stud for attachment of the factory BOV solenoid & bracket for factory isolator and engine mount point.
  • 1/8" threaded brass hose fitting for connection of factory BOV solenoid feed line.
  • System shipped fully assembled.  Simply disconnect the factory charge pipe assembly and install the new assembly to the turbocharger hose, intercooler hose and factory BOV solenoid and hoses.
  • Includes installation instructions. 

For more information on the functionality of the BOV & Charge Pipe, check out the full write-up on our blog.

Configurable Options:

  • Recirculation Option
    • This product no longer comes with recirculation options. The valve will come as vent to atmosphere no filter. You will need to source the parts necessary to VTA filter or factory recirculation.
  • Finish Option
    • This product will only come as a brushed stainless finish.

 Product Reviews

Showing reviews 1-8 of 13 | Next

  1. Nice!!!!

    Posted by on

    Awesome product! I love the synapse bov combined with the new charge pipe. The installation was a breeze, and mounted up nicely. Thank you Nameless for this upgrade.


  2. Love it!

    Posted by on

    Two left as of this review writing. That means only two more people will be lucky enough to get one. The powdercoat version is amazing eye candy, and it performs very well. Huge improvement over stock in both look and function.

    Installation is a breeze, this and an intake went on easier than the old stuff came off. I consider myself very fortunate to have gotten one before production ended. Buy it now before it's too late!


  3. Excellent product, easy install

    Posted by on

    Well designed kit but it did come without the install instructions. Was able to get the install instructions from tech support after a bit. Mine had the pre-load spring still installed which I had to remove (bummer). Seems to perform very well.


  4. Amazing product

    Posted by on

    If you're reading this, chances are it's still available, so stop reading and buy it before it's too late. Huge improvement over stock. Fit and finish are superb. Ordered it powdercoated black and it makes the engine bay look so much cleaner.


  5. Rough Install on 2015 K5 SXL

    Posted by on

    We had a rough time installing the charge pipe on our 2015 K5. The bead roll seemed to make the fitment of the charge pipe very tight. The factory charge pipe slides in and out of the factory couplers very well, but we struggled to get the nameless charge pipe to fit.

    Unfortunately we had an incident where the charge pipe separated from the IC CA return coupler under boost and we are thankful we didn't end up with turbo damage (that we know of). We ended up picking up a few more v-band clamps to replace all of the factory worm-drive style clamps and the good old hair-spray trick to keep them on.

    Unfortunately a mount & clamp below the charge pipe for a coolant line appears to have also scratched the powdercoat from engine movement, but it seems not to be visible (thankfully).

    We did end up shortening the factory IC CA return coupler as the rubber coupler had damage from the previously mentioned separation (cracks in the rubber) about 1/4" but this seemed to give us a better fitment and we were able to straighten out the coupler without any kinks.

    The BOV sounds amazing and the increase of throttle response is a welcome change. The instructions were easy to follow and thus far would recommend Nameless to my friends. We are proudly displaying our Nameless decals for all to see!


  6. Best BOV

    Posted by on

    This is by far the best BOV for my 13 Optima SX. I tried another bov first and it just didn't give the performance or sound I was looking for. I found Nameless and ordered their bov along with their intercooler and I'm hooked! Amazing performance and sound. I can't wait to install the Nameless intake that just came in to really wake up my 2.0T. Installation was a breeze.


  7. awsome upgrade

    Posted by on

    well made product. replace perfectly my OEM part and I can feel a better response of my engine under the boost threshold. The part look agressive and awsome when u open the hood.


  8. One Of THE BEST Mods so far!!!!

    Posted by on

    Driving around town is such a Joy! Lots more bottom end, moving in and out of traffic is a BLAST!! Thank You NAMELESS! I am a customer for LIFE!


Showing reviews 1-8 of 13 | Next

Vendors Other Products

You Recently Viewed...

What's News

newsletter

Follow us on

Copyright 2017 Nameless Performance. All Rights Reserved.

Click the button below to add the 2011-2014 T-GDi Charge Pipe to your wish list.