Here it is, the Axleback for the 2013-2016 Subaru BRZ/Scion FR-S. We use dual 4"Single Wall tips that fit the bumper nicely unlike the other exhausts out there with cartoon sized tips.
Our axleback has a 2.5" or 3.0" inlet which is larger than stock but not too large. Both split the main circuit to two 2" pipes. Both 2" circuits terminate in 4" diameter tips that sit flush with the bumper. This makes the car look like it should have from the factory.
The 3" inlet is intended for those looking to build a max hp N/A build, or going with some kind of forced induction. The 2.5" inlet is intended for the majority of people looking to keep the car N/A, and has a slightly quieter output than the 3"
The weight of our axleback is 17 pounds compared to the 25 pound stock muffler.
The axleback produces almost no peak HP but fills in the valley that is typical of this new direct injected boxer 4.
Our urethane bushings hold your exhaust in place better that the factory rubber bushings and are highly recommended if you race your car or enjoy spirited driving. During hard cornering the exhaust "wags" left to right which sometimes causes the tips to touch the bumper. When this happens there is a chance your bumper can be damaged. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place.
Showing reviews 1-8 of 58 | Next
Posted by Chris DaSilva on
What can I say? This exhaust is perfect for me. I'm running 5" mufflers with a 3" inlet (one day I'll be boosting it). It has a nice rumble at low RPMs and sounds good throughout the rev range. The quality is excellent and it looks great on the car.
I do have to mention Nameless and their excellent customer service as well. They were extremely helpful in fixing my exhaust when the tip started to crack with their new improved tip. I'll be coming back for additional upgrades down the line!
Posted by Samuel Robert on
I've had this exhaust for a few months now and I can say I'm 100% satisfied. I got the 5" cans which sound nice and mellow at low RMPs but really come alive in the upper end. A bit loud on cold startup but what exhaust isn't.
The exhaust came well packaged and undamaged. When I took it out of the packaging I thought about mounting it on the wall since it looked absolutely beautiful. Installation was a breeze and the tips lined up the first fit even with new bushings. Wish I gotten this sooner. Great product, great company, would highly recommend To anyone.
Posted by Pete Romano on
I installed this on my 2016 BRZ. I wanted a deeper tone but not so loud as to annoy the neighbours. So I went with the 5" mufflers and the sound is what I was wanting. It gets loud when you get on it but cruising down the highway it's very quiet with no droning. The tail pipes look perfect in the opening , nicely centered and just the right size. Install was very simple. I have a how to page on our scoobymods page along with a video and some db sound readings compared to stock. You can see that here: http://www.scoobymods.com/showthread.php/nameless-dual-exit-axleback-exhaust-14878.html ~peaty
Posted by Ricky Bui on
So this was my first mod on my brz. As the old exhaust wasn't cutting it for me. I got the 4" muffler with 3" tip. And I have to say it sounded a lot better then I expected. It sounded much better and cheaper then my friend borla exhaust. the only complain is I still think it should a bit louder.
Posted by Wilson on
After driving 22k miles stock everything, this exhaust adds a new dimension to my daily drive experience. No longer am I cranking on the radio as instead the natural deep tones of my BRZ become my soundtrack. Sounds great lower band in cabin but in the higher bands the distinction definately becomes harder to hear (engine/road noise overpowers) unless you were revving at a light. I was skeptical that a single swap can make my driving more fun but it definately is a great product. It feels like a whole different car. Definately should have came like this. 5" muffs with 3" inlet was the perfect config for me as the tone is definately there but it is controllable and not too loud. Haven't heard the other combos but it definately works for my conservative ears. I am just glad its installed and not having to wait in anticipation for 2 weeks as it was backordered.
Install was a pain without jacking up car and hanger removal tool. I just cut the old bushings. My screws and nut was also super tight maybe because the metal was still warm from the drive home, but it came off with a loud squeak after cranking it down. Adjust the bushings to get perfectly flush install. Recommend to install forward two bushings first then rear two as they can slide on in the same direction. Forward two you will need to bend it as much as you can to wrap it into the holes.
This purchase makes me want to swap out headers too for that sexy rumble.
Posted by Stefan on
I never leave online reviews, but because I love this company I'm leaving one. I own a few nameless products, and they all have one thing in common. The craftsmanship and performance is always exactly what I'm looking for. The only negative (and it's barely worth noting) is that their lead times can be long. That's a good indicator of a product in demand. The installation was a breeze, the fitment was perfect, and performance was exactly as advertised. I'd recommend Nameless to anybody, you won't be dissapointed with what you get. Thanks again to Nameless for a truly spot on product.
Posted by Nick on
Installed the 3" axleback on otherwise stock BRZ. I was concerned that the 3" exhaust would be too loud, but it sounds great without being too loud with the 5" mufflers.
Posted by Ben on
Just installed the Nameless Axleback w/ 4" Mufflers. The exhaust sounds awesome, so much deeper than expected and much deeper than I would have imagined possible for a 4 cylinder. This exhaust is LOUD, so much so that I'm seriously thinking about not getting the headers/downpipe installed. I might look into getting another resonator installed somewhere. If you're debating between 4" or 5", I would definitely say go 5" if you plan any other exhaust mods. All that being said, hands down one of the best sounding exhausts ever!
Showing reviews 1-8 of 58 | Next
All prices are in USD