Catback Exhaust - 2011-2014 STi and WRX Sedan - 5" Muffler - 3" Double Wall Tips

Everybody loves a good catback, and this one launched our entire brand.  With lots of configurable options available, check the main product page to compare the options.  This configuration is our 5 Inch Muffled with 3 Inch Double Wall Tips.  

ALL GASKETS AND HARDWARE INCLUDED

Tip Configuration:

• 3" Double Wall: These are T304 stainless, staggered double wall polished tips that fit perfectly into the cutout in the rear valence of the vehicle. 10 Degree Angle Cut with staggered arrangement (inboard tips stick out 1/2" further than outboard tips). 3″ diameter per tip, very close to an OEM look

Muffler Configuration:  

• 5" Mufflers:  Cut some of the harsh edge off the muffler delete deisgn with our 5" mufflers.  For as small as these are, they do a lot of heavy lifting, focusing most of the tone on the midrange and low tones of the exhaust.  This comes at the cost of cutting more of the higher pitch noises of your turbocharger, but when combined with an upgraded downpipe, these all come back to life.  

Questions about tip style? Click HERE

Installation Instructions:

Installation Guide - Axleback/Catback/Midpipe

Recommended Add-Ons:

Our urethane bushings hold your exhaust in place better that the factory rubber bushings and are highly recommended if you race your car or enjoy spirited driving. During hard cornering the exhaust "wags" left to right which sometimes causes the tips to touch the bumper. When this happens there is a chance your bumper can be damaged. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place.

• 2 Bushings: Replace the two bushings at the rear of the car closest to the bumper. Recommend for those who either drive hard on the street or race occasionally at the track.
  
  
• 4 Bushings: Replace all 4 rubber bushings on the axleback portion of the exhaust. Recommended for people who race their cars often.
  
  
• 5 Bushings: Replace all 5 of the factory rubber bushings from the midpipe back. Recommended for those who are hard core autocrossers or circuit racers

Exhaust Hanger Bushings

Exhaust Hanger Bushing Removal Tool

This tool makes removing the hanger bushings a breeze. We highly recommend this tool, it turns the removal process from frustrating to satisfying.

• Easily remove hanger bushings
• High Quality Steel Construction