Catback Exhaust - Outback XT/Wilderness 2020+ - Muffler Delete

Its here! our Nameless Performance Subaru Outback XT mid pipe for 2020+ models Including Wilderness. Made from high quality 3" T304 Stainless steel, Our mid pipe is designed so it can work with factory down pipes and the factory axle back exhaust as well as our aftermarket down pipe and axle back exhaust. we make this possible with our "super clever" 3" floating two bolt laser cut stainless flange on the front connection to the down pipe. 

The factory mid pipe features a conical front flange that interfaces with a ball-joint style gasket, which we often refer to as a 'donut gasket' because it looks like a big multi-layer metal donut.  The value of this type of connection provided by the factory is designed for long term sealing under hard cornering and off road applications, as well as having the best compliance to ensure that the exhaust aligns properly over the length of the mid pipe.  Our donut gasket is similar to the factory design, but it is larger in diameter - so large that it fits directly over the outside of the factory gasket and mates up to our flared front tube on our mid pipe.  This provides all of the functionality of the factory gasket, And when you are ready to upgrade your down pipe with a 3" from the turbo back, you can remove the factory parts and just use the gaskets included! Hows that for planning ahead? This design allows you to retain that factory functionality AND have a full 3" flow between the down pipe and mid pipe!

We are the only company that offers you a full flow design without any need to purchase conversion adapters or additional gaskets.  

and it gets even better! Our mid pipes also use a v-band connection at the rear of the front section of the mid pipe.  This allows you to have adjustability in the clocking of the mid pipe to get the fit perfect during your installation. 

We have also added a 3" resonator to help dial out unwanted drone at cruising speeds. The "Y" pipe splits to dual 2.25" pipes with mandrel bends for the smoothest exhaust flow possible. Pair this mid pipe with our customizable Nameless performance Axle back available in muffled and non muffled versions, and you will have great sound and performance. 

All flanges are laser cut, and come with new hardware for simple installation. Be sure to check out our new exhaust bushings to make installation even more simplified.

See product video below for a comparison of exhaust sounds in different configurations!

Fits 2020+ Outback XT, All Trim Levels including the Wilderness.  Includes a new hardware kit for installation. 

This will NOT work with the Non-Turbo Models. 

Recommended Add-Ons:

Our urethane bushings hold your exhaust in place better that the factory rubber bushings and are highly recommended if you race your car or enjoy spirited driving. During hard cornering the exhaust "wags" left to right which sometimes causes the tips to touch the bumper. When this happens there is a chance your bumper can be damaged. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place.

• 2 Bushings: Replace the two bushings at the rear of the car closest to the bumper. Recommend for those who either drive hard on the street or race occasionally at the track.
  
  
• 4 Bushings: Replace all 4 rubber bushings on the axleback portion of the exhaust. Recommended for people who race their cars often.
  
  
• 5 Bushings: Replace all 5 of the factory rubber bushings from the midpipe back. Recommended for those who are hard core autocrossers or circuit racers

Exhaust Hanger Bushings

Exhaust Hanger Bushing Removal Tool

This tool makes removing the hanger bushings a breeze. We highly recommend this tool, it turns the removal process from frustrating to satisfying.

• Easily remove hanger bushings
• High Quality Steel Construction