Midpipe - 2020-2025 Outback XT/Wilderness

Its here! our Nameless Performance Subaru Outback XT midpipe for 2020-2025 models Including Wilderness. Made from high quality 3" T304 Stainless steel, Our midpipe is designed so it can work with factory downpipes and the factory axleback exhaust as well as our aftermarket downpipe and axleback exhaust. we make this possible with our "super clever" 3" floating two bolt laser cut stainless flange on the front connection to the downpipe.

The factory midpipe features a conical front flange that interfaces with a ball-joint style gasket, which we often refer to as a 'donut gasket' because it looks like a big multi-layer metal donut. The value of this type of connection provided by the factory is designed for long term sealing under hard cornering and off road applications, as well as having the best compliance to ensure that the exhaust aligns properly over the length of the midpipe.  Our donut gasket is similar to the factory design, but it is larger in diameter - so large that it fits directly over the outside of the factory gasket and mates up to our flared front tube on our midpipe.  This provides all of the functionality of the factory gasket, And when you are ready to upgrade your downpipe with a 3" from the turbo back, you can remove the factory parts and just use the gaskets included! Hows that for planning ahead? This design allows you to retain that factory functionality AND have a full 3" flow between the downpipe and midpipe!

We are the only company that offers you a full flow design without any need to purchase conversion adapters or additional gaskets. And it gets even better! Our midpipes also use a V-band connection at the rear of the front section of the midpipe.  This allows you to have adjustability in the clocking of the midpipe to get the fit perfect during your installation.

We have also added a 3" resonator to help dial out unwanted drone at cruising speeds. The "Y" pipe splits to dual 2.25" pipes with mandrel bends for the smoothest exhaust flow possible. Pair this midpipe with our customizable Nameless performance Axleback available in muffled and non muffled versions, and you will have great sound and performance.

All flanges are laser cut, and come with new hardware for simple installation. Be sure to check out our new exhaust bushings to make installation even more simplified.

Fits:

• 2020-2025 Outback XT (All Trim Levels)
• 2020-2025 Outback Wilderness

This will NOT work with the Non-Turbo Models.

Includes:

• 1 Midpipe
• 1 Hardware kit for installation

Recommended Add-Ons:

Exhaust Hanger Bushings

Upgrading to our long lasting Nameless Performance urethane exhaust bushings from the factory rubber bushings is highly recommended. The softer rubber factory bushings are overly flexible and if you race your car or spend time at an incline off-road, the exhaust can "wag" left to right which sometimes causes noise or the tips to touch the rear bumper. When this happens there is a chance your bumper can be damage or if you have a hitch or any other accessories can cause annoying sounds. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place. These upgraded bushings are not necessary to install our exhaust systems but for the small cost of upgraded units, it is an excellent idea!

• Add 1 Bushings to your cart: Replace 1 rubber bushings on the midpipe portion of the exhaust.
• Add 5 Bushings to your cart: Replace all 5 rubber bushings on your midpipe and axleback.

Exhaust Hanger Bushing Removal Tool

This tool makes removing the hanger bushings a breeze. We highly recommend this tool, it turns the removal process from frustrating to satisfying.

• Easily remove hanger bushings
• High Quality Steel Construction

Add an Exhaust Hanger Bushing Removal Tool to your cart (US Shipping)
Add an Exhaust Hanger Bushing Removal Tool to your cart (International Shipping)